0492 863 715 | Dazzle Dental - Official distributor in Australia sales@dazzledental.com.au

Elegoo Mercury Wash & Curing Devices

 

Technical Specifications
● Machine: Curing and washing
● Control method: Touch button LED indicator
● Power: 40W
● Input voltage: AC110/220V 50/60Hz
● UV lights: 405nm+365nm
● Curing and washing time: 2min 4min 6min
● Max model size for washing: 115mm(L)*65mm(W)*165mm(H)
● Machine size: 225mm(L)*220mm(W)*378mm(H)
● Max model size for curing: 140mm(D)*165mm(H)
● Weight: ~6kg
Categories: ,
Name
Email
Phone
Enquiry

Description

With more and more resin 3D printers entering a packed marketplace on a seemingly daily basis, companies are starting to push out more accessories and products to make this somewhat messy 3D printing medium both easier and cleaner.

Enter washing and curing machines, devices to make the entire post-production process a lot smoother by doing their level best to stop you from getting your hands (quite literally) dirty. In theory, they save you the hassle of hand-washing your prints in isopropanol (IPA) – a simultaneously stinky, hazardous, and necessary step – as well as the stage of leaving your prints out in the sun or a homemade blacklight construction. Instead, these helpful little machines should take care of that for you.

Sticking to its celestial track, Elegoo offers the Mercury (which is limited to curing only – no washing), and more recently the Mercury Plus, a combined wash and cure machine.

 

Features

Build Plate Mount

At first glance, the Elegoo Mercury Plus looks eerily similar to Anycubic’s Wash & Cure machine, but there are notable differences on closer inspection. Most significantly, it comes with a build plate mount for the Elegoo Mars resin 3D printer, which lets you wash your print and the build plate together, reducing the likelihood of touching the uncured resin.

Container to Wash Multiple Prints

If you want to wash multiple prints simultaneously, the Mercury Plus also comes with a basket to put them all in together into the machine.

Adjustable Bracket

You don’t have to fill the IPA bucket to the top, thanks to the Mercury Plus’ adjustable plate-holding bracket. Just lower the plate to the IPA you do have.

Safety features

The Mercury Plus’ protective cover blocks most UV rays output by the unit’s bank of LEDs, protecting you and the room from its high-intensity light. The Mercury Plus also cuts out if the cover is lifted, protecting you from the UV light and splashing chemicals.

Suitable for many models

You don’t need to own an Elegoo printer to use its Washing and Curing machine, but you should make sure your prints’ dimensions will fit within it. The maximum print size it can handle is 125 x 85 x 160 mm.

User Interface

There are four buttons on the front of the Mercury Plus for selecting the mode of operation (washing or curing), increasing the run time, decreasing the run time, and beginning or pausing the job. A simple display to the left of the controls gives the time remaining and an indicator of the currently selected mode. Seems pretty foolproof.

Additional features:

  • 385nm and 405nm UV curing lamp beads
  • 360-degree rotating curing turntable
  • POM rotor

Related products